3. Brush painting in strong pink, orange, yellow and green and black procion dye paste. Cured 20 hours
I poured the black dye paste into a silk paint bottle with a fine nib and drew the black outlines of pattern onto the fabric and then added the other colours with a brush. It was very random and I just had to keep going not really knowing what the outcome would be. The main problem I had was to get the black dye paste to flow evenly from the paint bottle. The nib was a little to narrow and I think un-mixed dye particles clogged it easily – a lesson for next time.
The finished design is really experimental and unpolished but I will persevere!
Here are the finished fabrics ready to be made into jackets this week – with some extra embellishment:
Pre soak the fabric – I have bought fabric that is already prepared for dyeing and will soak this in a Soda Ash solution over night
Mix 3/4 cup Soda ash with 7 Litres water in a large bucket and stir until the soda has dissolved. Then add half the fabric and leave to soak.
Wring out the fabric and then spin in the washing machine to remove excess water. The fabric must remain wet for dyeing.
2. Mix the dye base for 1.5 metres fabric:
Put on the face mask, gloves and apron
Mix together in a large plastic jug:
4 cups warm water
3/4 cup urea
1 tbsp sodium alginate
Mix well with a whisk as the mixture blends and thickens. Divided the paste base into 4 glass jars.
3. Prepare the fabric
As I am experimenting at this stage I will cut the pre-soaked fabric and unsoaked fabric into 20cm squares and lay them across the prepared table.
4. Mixing the dyes
Face mask, gloves and apron on
Add 4 teaspoon of soda ash to the paste base and mix in well
Measure out 1/2 teaspoon of dye powder into a glass jar and add 1-2 teaspoons of water and mix to a paste – it is important not to add too much water and to mix the dye very well so that it has all been dissolved. Unmixed particles of dye will cause streaking on the fabric.
Repeat this process with the other 3 dye colours.
N.b. Once the dye has been mixed with the soda ash in the dye mixture the dye will have short shelf life – maximum 4 hours so my experiment will have to be completed in that time
Use a soak and unsoaked piece of fabric for each experiment. First label the fabric with:
S – soaked
US – unsoaked
Comments in log book
a. Lino print
b. Brush strokes – wide and fine
c. Water colour – spraying extra water on the fabric to see how the paste behaves